EasyManuals Logo
Home>Onkyo>Car Receiver>CR-N7

Onkyo CR-N7 User Manual

Onkyo CR-N7
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23
Understanding Common Operations—Continued
Adjust sound quality during playback with CD or radio, etc.
Press S.BASS repeatedly.
Pressing S.BASS repeatedly will change the option in
the following order.
Press MUTING on the remote controller. The MUTING
indicator blinks in the display.
To restore the sound, press MUTING again.
Tips:
During muting:
If you turn the VOLUME knob on the CD receiver or
press VOLUME on the remote controller, the
sound will be restored.
If you turn the unit off and then on again, the sound
will be restored.
MUTING
S.BASS
2
1
Adjusting Bass
1
Press TONE repeatedly to select
Bass.
2
Press / to adjust, and
ENTER to set.
The factory default value is set to
±0; you can adjust the value by
increment or decrement of 2 steps
between 10 and +10.
To adjust treble, press ENTER.
Note:
If you leave the system untouched for 8
seconds, the display returns to the previ-
ous screen.
Emphasizing the Low End Using the
Remote Controller
S.Bass Off
S.Bass 1
(Low end is emphasized.)
S.Bass 2
(Low end is even more emphasized.)
Adjusting Treble
1
Press TONE repeatedly to select
Treble.
2
Press / to adjust, and
ENTER to set.
The factory default value is set to
±0; you can adjust the value by
increment or decrement of 2 steps
between 10 and +10.
Press ENTER to return to the previous
display.
Note:
If you leave the system untouched for 8
seconds, the display returns to the previ-
ous screen.
Muting the Sound
MUTING
/

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo CR-N7 and is the answer not in the manual?

Onkyo CR-N7 Specifications

Power IconPower
power supplyAC 230–240 V, 50 Hz
power consumption68 W
stand-by power consumption0.3 W
Audio Inputs and Outputs IconAudio Inputs and Outputs
analog inputsLINE, TAPE, HDD
digital outputsOptical: 1
analog outputsTAPE, HDD
Amplifier Specifications IconAmplifier Specifications
power output14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power26 W + 26 W (4 Ω, JEITA)
damping factor25 (8 Ω)
Tuner Specifications IconTuner Specifications
fm tuning frequency range87.5 MHz–108 MHz
am tuning frequency range522 kHz–1611 kHz
stereo separation40 dB (1 kHz)
CD Specifications IconCD Specifications
frequency response10 Hz–20 kHz
audio dynamic range92 dB
thd (total harmonic distortion)0.009 %
Weight and Dimensions IconWeight and Dimensions
dimensions205 W x 147 H x 356 D mm
weight4.3 kg

Related product manuals