EasyManuals Logo
Home>Onkyo>Car Receiver>CR-N7

Onkyo CR-N7 User Manual

Onkyo CR-N7
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26
Playing a CD—Continued
MP3 CDs may store a group containing groups across
some hierarchies as shown in the illustration below. In
MP3 CDs, you can use the Navigation and All Group
modes to locate track stored on the CDs. When locating
a track, the Navigation mode allows you to trace through
the hierarchies while the All Group mode to select the
group directly.
When you do not select any specic track or group to
play, the unit starts playing tracks on the MP3 CD from
Track 1 and the rest of the tracks are played in the
numerical order of track numbers shown in the illustra-
tion above.
Selecting MP3 Tracks in Navigation Mode
With Navigation mode you can select MP3 tracks by
navigating through the group hierarchy. This mode can
only be used while playback is stopped.
If in Random mode, press YES/MODE to switch to Nor-
mal mode.
Selecting MP3s
Track11
Track1
Track10
Group3
Track12
Root Group1
Group2
Track13
Group4
Track14
Track18
2-4
1
EDIT/NO/
CLEAR
1
While playback is stopped, press
GROUP for 2 seconds.
The CD receiver enters Navigation
mode.
2
Press MULTI JOG.
The name of the rst group one level
down from root appears on the display.
If the disc has no groups, the name of
the rst track is displayed.
3
Use MULTI JOG to select other
groups and tracks at the same
level.
Groups that do not contain MP3 tracks
or groups cannot be selected.
4
To access tracks or groups
inside another group, select the
group, and then press MULTI
JOG.
Use MULTI JOG to select the tracks
and groups in that group.
To move up a level, press EDIT/NO/
CLEAR.
NAMEGROUP
C D
MP3
NAMEGROUP
C D
MP3
NAME
C D
MP3
TRACK
1
3
2, 4
EDIT/NO/
CLEAR
Using the remote controller

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo CR-N7 and is the answer not in the manual?

Onkyo CR-N7 Specifications

Power IconPower
power supplyAC 230–240 V, 50 Hz
power consumption68 W
stand-by power consumption0.3 W
Audio Inputs and Outputs IconAudio Inputs and Outputs
analog inputsLINE, TAPE, HDD
digital outputsOptical: 1
analog outputsTAPE, HDD
Amplifier Specifications IconAmplifier Specifications
power output14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power26 W + 26 W (4 Ω, JEITA)
damping factor25 (8 Ω)
Tuner Specifications IconTuner Specifications
fm tuning frequency range87.5 MHz–108 MHz
am tuning frequency range522 kHz–1611 kHz
stereo separation40 dB (1 kHz)
CD Specifications IconCD Specifications
frequency response10 Hz–20 kHz
audio dynamic range92 dB
thd (total harmonic distortion)0.009 %
Weight and Dimensions IconWeight and Dimensions
dimensions205 W x 147 H x 356 D mm
weight4.3 kg

Related product manuals