Onkyo CR-N7 User Manual

30
Various Ways to Play CDs—Continued
All tracks on the disc will be shuffled, then played back.
• You can execute this function only when the input
source is CD and the unit is stopped.
To cancel the setting:
See “Cancelling the Playback Mode” on page 31.
• You can also cancel the setting by removing the disc
or selecting the standby mode.
• The 1 Track Repeat mode repeatedly plays back one
track on the CD.
• You can combine Repeat mode with Memory, 1GR
(MP3 CD only), or Random playback mode. The 1
Track Repeat mode is available only in combination
with normal playback.
Random Playback
1
Press YES/MODE repeatedly until
the RDM indicator lights in the dis-
play.
2
Press .
Random playback starts.
2
1
Display
SOURCE TRACK
RDM
DISC TOTAL
The RDM indicator lights.
/
SOURCE TRACK
RDM
The playing track
1
2
Using the remote controller
Repeat/1 Track Repeat Playback
Press REPEAT repeatedly until the
REPEAT or REPEAT 1 indicator
lights in the display.
The Repeat or 1 Track Repeat playback
mode is set.
REPEAT
REPEAT 1
The REPEAT or REPEAT 1
indicator lights.
Using the remote controller
REPEAT

Onkyo CR-N7 Specifications

Power

power supply	AC 230–240 V, 50 Hz
power consumption	68 W
stand-by power consumption	0.3 W

Audio Inputs and Outputs

analog inputs	LINE, TAPE, HDD
digital outputs	Optical: 1
analog outputs	TAPE, HDD

Amplifier Specifications

power output	14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power	26 W + 26 W (4 Ω, JEITA)
damping factor	25 (8 Ω)

Tuner Specifications

fm tuning frequency range	87.5 MHz–108 MHz
am tuning frequency range	522 kHz–1611 kHz
stereo separation	40 dB (1 kHz)

CD Specifications

frequency response	10 Hz–20 kHz
audio dynamic range	92 dB
thd (total harmonic distortion)	0.009 %

Weight and Dimensions

dimensions	205 W x 147 H x 356 D mm
weight	4.3 kg