34
Programming Radio Stations
You can store the frequencies of stations one by one manually into the preset memory channels. This is useful
when you want to program the stations in your favorite order.
In addition to this method, FM has “Auto Preset” mode to store frequencies automatically.
Turn on the power to the unit before you start the procedure.
Programming FM/AM Stations One by One – Preset Write
1
3
3-6
2
• You can preset up to 30 channels including
both FM and AM stations. For example, if you
have already stored FM stations to eight chan-
nels, you can use 22 channels to store preset
AM stations.
• Programmed FM and AM stations are indi-
cated separately. Therefore, one of the preset
FM stations and one of the preset AM stations
could use the same channel number.
• The Preset Write function enables you to store
radio station frequencies to any channel num-
ber. For example, you could program three AM
stations to channels 2, 5, and 9.
Before auto presetting
Display
1
Press INPUT / to display
“AM.”
Press again to select “FM” to store an
FM station.
2
Press / to tune in the radio
station you wish to preset.
If you hold down either of the buttons,
the frequency keeps changing.
3
Press EDIT/NO/CLEAR and turn
MULTI JOG until “Preset Write?”
appears in the display.
SOURCE
SOURCE
4
Press MULTI JOG.
The channel number to be preset flashes.
To cancel presetting, press EDIT/NO/
CLEAR instead.
5
If you wish to change the channel
number, turn MULTI JOG.
6
Press MUTLI JOG to confirm.
If “Complete” appears
The radio station is registered to the pre-
set channel.
SOURCE
SOURCE
To Next Page
Loading...
Need help?
Power
Audio Inputs and Outputs
Weight and Dimensions
