Onkyo CR-N7 User Manual

40
Changing the FM/AM Preset Channels
Using the delete and copy functions, you can delete preset stations, copy a preset station to another channel, or
change the channel number.
To change the channel number:
Use the copy and delete functions.
For example, if you wish to change channel 4 (which has
an FM station programmed) to channel 6 (an empty
channel):
1 Copy the station in channel 4 to channel 6.
2 Delete the station in channel 4.
If you copy a preset channel to another channel, the
name of the preset channel (see page 42) is also copied
to the other channel.
Tips for Changing the Preset
Channels
Copying a Preset Channel – Preset
Copy
1
Call the preset channel you wish to
copy.
2
Press EDIT/NO/CLEAR and turn
MULTI JOG until “PresetCopy?”
appears in the display.
2, 5
2-5
Display
SOURCE
3
Press MULTI JOG.
4
Turn MULTI JOG to select the pre-
set channel number to which you
wish to copy (destination).
5
Press MULTI JOG to confirm.
If “Complete” appears:
The same radio station is copied to the
preset channel.
If “Overwrite?” appears:
The channel you wish to copy to is regis-
tered already.
• To register the new radio station by
deleting the existing radio station:
Press MULTI JOG.
• To cancel copying:
Press EDIT/NO/CLEAR.
SOURCE
SOURCE
2
3, 5
2, 4
Using the remote controller

Onkyo CR-N7 Specifications

Power

power supply	AC 230–240 V, 50 Hz
power consumption	68 W
stand-by power consumption	0.3 W

Audio Inputs and Outputs

analog inputs	LINE, TAPE, HDD
digital outputs	Optical: 1
analog outputs	TAPE, HDD

Amplifier Specifications

power output	14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power	26 W + 26 W (4 Ω, JEITA)
damping factor	25 (8 Ω)

Tuner Specifications

fm tuning frequency range	87.5 MHz–108 MHz
am tuning frequency range	522 kHz–1611 kHz
stereo separation	40 dB (1 kHz)

CD Specifications

frequency response	10 Hz–20 kHz
audio dynamic range	92 dB
thd (total harmonic distortion)	0.009 %

Weight and Dimensions

dimensions	205 W x 147 H x 356 D mm
weight	4.3 kg