Onkyo CR-N7 User Manual

29
Various Ways to Play CDs
Different playback modes are available in addition to
normal playback.
You can select and store track numbers (up to 25) in a
desired playback order.
• You can execute this function only when the input
source is CD and the unit is stopped.
• For information on MP3 CD source, see page 12.
To select a track number in memory:
Turn MULTI JOG or press / on the remote con-
troller repeatedly during Memory playback.
To check the track numbers in memory:
Press / while the CD is stopped.
To erase a track number from memory:
• While in Memory playback mode, and the CD is
stopped, press EDIT/NO/CLEAR. Each press erases
the last track number stored in memory.
• If you change the playback mode, all data stored for
Memory playback will be erased.
• You can also erase the setting by removing the disc or
selecting the standby mode.
Memory Playback
1
Press YES/MODE repeatedly until
the MEM indicator lights in the dis-
play.
2
Turn MULTI JOG to select the first
track you want to play back, then
press MULTI JOG.
To select the next track to be played,
repeat this step.
You can also use the number buttons on
the remote controller to select a track.
To cancel a track number stored in
memory:
Press EDIT/NO/CLEAR. Each press
erases the last track number stored in
memory.
Notes:
• MP3 CD:
In Navigation mode, perform the steps
1-4 on page 26. In All Group mode,
perform the steps 1-4 on page 27.
• During MP3 CD playback, the total
playing time does not appear.
3
1
2
Display
MEM
C D
SOURCE TRACK
The MEM indicator lights.
MEM
C D
SOURCE TRACK
MEM
C D
SOURCE TRACK
Track number to be
stored in memory
The total time of
programmed tracks
•“--:--” appears when the total time
meets or exceeds 99 minutes 59 sec-
onds.
• You can program up to 25 tracks for a
CD. If you try to program more tracks,
the unit displays “Memory Full.”
3
Press to start Memory play.
/
MEM
C D
SOURCE TRACK
The playing track number
Using the remote controller
/
/
2
3
1
Number buttons
(See page 25.)
(These buttons do
not operate during
Memory
playback.)
EDIT/NO/
CLEAR

Onkyo CR-N7 Specifications

Power

power supply	AC 230–240 V, 50 Hz
power consumption	68 W
stand-by power consumption	0.3 W

Audio Inputs and Outputs

analog inputs	LINE, TAPE, HDD
digital outputs	Optical: 1
analog outputs	TAPE, HDD

Amplifier Specifications

power output	14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power	26 W + 26 W (4 Ω, JEITA)
damping factor	25 (8 Ω)

Tuner Specifications

fm tuning frequency range	87.5 MHz–108 MHz
am tuning frequency range	522 kHz–1611 kHz
stereo separation	40 dB (1 kHz)

CD Specifications

frequency response	10 Hz–20 kHz
audio dynamic range	92 dB
thd (total harmonic distortion)	0.009 %

Weight and Dimensions

dimensions	205 W x 147 H x 356 D mm
weight	4.3 kg