Onkyo CR-N7 User Manual

45
Setting the Clock—Continued
You can select either the 12-hour or 24-hour display.
(This section explains how to set the time based on the
24-hour display.)
To cancel the clock setting
Press EDIT/NO/CLEAR.
Setting the Clock Manually
1
Press TIMER repeatedly until
“Clock” appears in the display.
2
Press MULTI JOG.
3
Turn MULTI JOG.
Select “Manual Adjust.”
4
Press MULTI JOG.
You can now set the day of the week.
5
Turn MULTI JOG to select the cur-
rent day of the week.
6
Press MULTI JOG to confirm the
setting.
You can now set the time.
EDIT/
NO/
CLEAR
STANDBY/ON
2-81
Display
DISPLAY
button
SUN - Sunday
MON - Monday
TUE - Tuesday
WED - Wednesday
THU - Thursday
FRI - Friday
SAT - Saturday
7
Turn MULTI JOG to set the current
time.
You can also use the number buttons on
the remote controller.
To switch between the am and pm indica-
tors, press the >10 button on the remote
controller.
8
Press MULTI JOG to start the
clock.
You can also use the ENTER button on
the remote controller.
It can be helpful to synchronize with an
accurate time source.
The clock starts operating and a dot indi-
cating seconds starts to flash.
2, 4, 6, 8
1
3, 5, 7
EDIT/
NO/CLEAR
CLOCK CALL
DISPLAY
Using the remote controller
Number buttons

Onkyo CR-N7 Specifications

Power

power supply	AC 230–240 V, 50 Hz
power consumption	68 W
stand-by power consumption	0.3 W

Audio Inputs and Outputs

analog inputs	LINE, TAPE, HDD
digital outputs	Optical: 1
analog outputs	TAPE, HDD

Amplifier Specifications

power output	14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power	26 W + 26 W (4 Ω, JEITA)
damping factor	25 (8 Ω)

Tuner Specifications

fm tuning frequency range	87.5 MHz–108 MHz
am tuning frequency range	522 kHz–1611 kHz
stereo separation	40 dB (1 kHz)

CD Specifications

frequency response	10 Hz–20 kHz
audio dynamic range	92 dB
thd (total harmonic distortion)	0.009 %

Weight and Dimensions

dimensions	205 W x 147 H x 356 D mm
weight	4.3 kg