Onkyo CR-N7 User Manual

37
Listening to an FM/AM Station
First, program the stations into preset channels (see
pages 34 and 36).
Turn on the power to the unit before you start the proce-
dure.
1
Select FM or AM.
Press the INPUT or button to
select FM or AM.
The channel selected most recently will
be recalled.
2
Turn MULTI JOG or press the dial
repeatedly to select the desired
preset channel.
Turn the dial counterclockwise to select
a lower channel number, or turn it clock-
wise to select a higher channel number.
1
2
Display
AUTO
SOURCE
FM ST
AUTO
SOURCE
FM ST
2
1
Using the remote controller
Adjusting the Antenna
1
2
Change the direction of the
antenna to determine the best
reception.
Affix the antenna using a thumbtack.
(Do not press the thumbtack through
the antenna.)
Caution: Be careful not to prick your
finger!
Adjusting the AM antenna
Adjust the location and position of the
AM antenna while listening to an AM
broadcast to determine the best recep-
tion.
Adjusting and installing the FM antenna
Adjust the location of the FM antenna while
listening to an FM broadcast.

Onkyo CR-N7 Specifications

Power

power supply	AC 230–240 V, 50 Hz
power consumption	68 W
stand-by power consumption	0.3 W

Audio Inputs and Outputs

analog inputs	LINE, TAPE, HDD
digital outputs	Optical: 1
analog outputs	TAPE, HDD

Amplifier Specifications

power output	14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power	26 W + 26 W (4 Ω, JEITA)
damping factor	25 (8 Ω)

Tuner Specifications

fm tuning frequency range	87.5 MHz–108 MHz
am tuning frequency range	522 kHz–1611 kHz
stereo separation	40 dB (1 kHz)

CD Specifications

frequency response	10 Hz–20 kHz
audio dynamic range	92 dB
thd (total harmonic distortion)	0.009 %

Weight and Dimensions

dimensions	205 W x 147 H x 356 D mm
weight	4.3 kg