Onkyo CR-N7 User Manual

24
Playing a CD
To locate the beginning of the playing
track, turn MULTI JOG counterclockwise
slightly.
• If you turn it further, you can select the
previous tracks in reverse order.
• For MP3 discs, you can also select tracks in other
groups.
• Rotate the dial counter-clockwise while the unit is
stopped to select the previous track.
Press the dial while the unit is stopped to start play-
back.
• A CD track can also be selected and
played back by pressing MULTI JOG
while the CD is playing or stopped. Each
press skips one track ahead.
Press and hold to fast forward,
and to fast reverse during play-
back or pause until you locate the
desired point.
Notes:
• When fast-forwarding or fast-reversing a CD, the unit
searches the desired point ten times faster than the
normal speed. If you press and hold or longer
than four seconds, the unit starts searching the desired
point 60 times faster.
When fast-forwarding or fast-reversing a MP3 track,
the unit always searches the desired point 10 times
faster.
• For MP3 discs, fast reverse only works within the
MP3 track that’s currently playing.
In addition, fast-forward and fast-reverse may not
work smoothly depending on the bitrate of MP3 track.
1
Insert a CD (Compact Disc).
1 Press to extend the disc tray.
2 Place the CD in the tray with the
label side facing up.
If you play a 8 cm CD, place it in the
center circle of the tray.
Audio-CD
MP3-CD
Tip:
• If the unit is in Standby mode, it turns
on automatically when you press .
2
Press to start playback.
The disc tray retracts and playback starts.
To stop playback
Press . Playback automatically stops
when the last track has been played.
To pause
Press . “” lights up in the dis-
play. To resume playback, press
again.
To take out the CD
Press to extend the disc tray.
1-
1-
2
MULTI JOG
2
1
Display
SOURCE TRACK DISC TOTAL
C D
NORMAL
Total number
of tracks
Total playing
time
“DISC TOTAL”
Lights up while the disc
information is displayed.
NAME
GROUP
C D
MP3
TRACK DISC
NORMAL
Total number
of groups
Total number
of tracks
Disc name
/
/
/
Selecting the Track to Play
Locating a Particular Point in a Track

Onkyo CR-N7 Specifications

Power

power supply	AC 230–240 V, 50 Hz
power consumption	68 W
stand-by power consumption	0.3 W

Audio Inputs and Outputs

analog inputs	LINE, TAPE, HDD
digital outputs	Optical: 1
analog outputs	TAPE, HDD

Amplifier Specifications

power output	14 W + 14 W (8 Ω, 40 Hz–20 kHz THD, 0.4%)
dynamic power	26 W + 26 W (4 Ω, JEITA)
damping factor	25 (8 Ω)

Tuner Specifications

fm tuning frequency range	87.5 MHz–108 MHz
am tuning frequency range	522 kHz–1611 kHz
stereo separation	40 dB (1 kHz)

CD Specifications

frequency response	10 Hz–20 kHz
audio dynamic range	92 dB
thd (total harmonic distortion)	0.009 %

Weight and Dimensions

dimensions	205 W x 147 H x 356 D mm
weight	4.3 kg