Onkyo HT-R791 User Manual

Initial Setup
This section explains the settings that we recommend you
to make before using the AV receiver for the very first
time. A setup wizard is launched upon first-time use to let
you perform those settings.
This step determines the language used for the onscreen
setup menus. See "Language" in "OSD Setup"
(_ page 59).
• Pressing HOMEwill close thesetup wizard,To restart the initial
setup, select "Initial Setup" in the "Hardware Setup" menu
(3 page 62).
Alter selecting the language for on-screen setup menus, a
welcome screen is displayed.
Welcome to initial setup. Haveyou connected all the s leakers and devices?
Before starting, please connect speakers and sources.
Now, wouldyou like tostart Initial setup?
1stStep :Audyssey 2EQ: Auto Setup
2nd Step : Source Connection
3rd Step : Remote ModeSetup
4th Step :Network Connection
No
HOME E×lt
1
Use A/T on the AV receiver or remote controller to
select one of the following options, and then press
ENTER.
Yes:
Continues to "Audyssey 2EQ: Auto Setup".
No:
Skips the settings and terminates the initial
setup. The setup wizard goes to "Terminating the
Initial Setup". You can always restart the initial
setup by selecting "Initial Setup" in the
"Hardware Setup" menu (@ page 62).
Turning On & Basic Operations
This step performs the automatic speaker setup.
1
Use A/¥ to select one of the following options, and
then press ENTER.
Do it Now:
The automatic speaker setup is performed
following instructions on screen. Refer to step 2
of "Using the Automatic Speaker Setup"
(_ page 32). When this setting is complete, the
setup wizard continues to "Source Connection".
Do it Later:
Skips this setting.
Press ENTER and continue to "Source
Connection".
En-20
©©

Onkyo HT-R791 Specifications

General

Brand	Onkyo
Model	HT-R791
Category	Receiver
Language	English