1
2
3
Remote
indicator
HOME
Press RECEIVER followed by HOME.
Use 4/*- to select "Setup", and then press ENTER.
Use A/V to select a main menu item, and then press
ENTER.
4 Use l/¥ to select a sub menu item, and then press
ENTER.
5 Use l/¥ to select a setting target, and use _/_ to
change the setting.
Press HOMEto close the menu.
Press RETURN to return to the previous menu.
m Screen Saver
If there is no video signal on the current input source and
no operation for a specific time (three minutes by
default), a screen saver automatically comes on.
• The time until the screen saver activates itself call be changed
ill the "Screen Saver" setting (3 page 59).
• The screen will return to its previous state if the AV receiver is
operated.
Explanatory Notes
Advanced Operations
_Speaker Configuration
(_m Subwoofer
_--]_ Yes
@ Main Menu
(_) Sub Menu
@ Setting target
@ Setting options (default setting underlined)
• This procedure call also be performed on the AV receiver by
using SETUP, the cursor buttons, and ENTER.
• During Audyssey 2EQ0,_Room Correction and Speaker Setup,
messages, etc., that are displayed on the TV screen will appear on
the AV receiver's display.
En-46 V
©©
To Next Page
Loading...
Need help?
General
