Controlling Other
Components
You can use the AV receiver's remote controller to control
your other AV components. This section explains how to
enter the remote control code for a component that you
want to control: DVD, TV, CD, etc.
The following REMOTE MODE buttons are
preprogrammed with remote control codes for controlling
the components listed. You do not need to enter a remote
control code to control these components.
For details on controlling these components, see the
indicated pages.
BDIDVD Onkyo Blu-ray Disc player (3 page 71)
TVICD Onkyo CD player (3 page 70)
You can look up for an appropriate remote control code
from the on-screen menu.
• This can only be carried out using the on-screen menu.
1
2
3
Press RECEIVER followed by HOME.
Use _/_ to select "Setup", and then press ENTER.
Use l/¥ to select "Remote Controller Setup", and
then press ENTER.
4 Use l/¥ to select "Remote Mode Setup", and then
press ENTER.
5
6
7
8
Use &/¥ to select a remote mode, and then press
ENTER.
The menu of category selection appears.
Use h/¥ to select a category, and then press
ENTER.
The keyboard screen for brand name input appears.
Use &l¥1_lll_ to select a character, and then press
ENTER.
Repeat this step for the first three characters of the
brand name.
When you have entered the 3rd character, select
"Search" and press ENTER.
A list of brand names is retrieved.
If the desired brand name is not found:
Use _ to select "Not Listed", and then press
ENTER.
The keyboard screen for brand name input appears.
Use A/V to select a brand, and then press ENTER.
A remote control code with its instructions are
displayed. Follow the procedure.
9
Controlling Other Components
If you can control the component, use h/¥ to select
"OK", and then press ENTER.
The on-screen menu returns to the "Remote Mode
Setup" front screen.
If you cannot control the component, use h/¥ to
select "Try Next Code" and press ENTER.
The next code is displayed.
En-68 V
©©
To Next Page
Loading...
Need help?
General
