Onkyo HT-R791 User Manual

_'I l_ Hw.0 _ " _=
3 _;'*., 4 5 S_,
1@ 2_ . J_2_,l "Setup"- _0_
You can assign a default listening mode to each input
source that will be selected automatically when you select
each input source. For example, you can set the default
listening mode to be used with Dolby Digital input signals.
You can select other listening modes during playback, but
the mode specified here will be resumed once the AV
receiver has been set to standby.
1 Use A/$ to select the input source that you want to
set, and then press ENTER.
The following menu appears.
..........................................................................................................................................
iii ii_
Mono/Multlplex Source LastValid
2ch Source LastValid
Dolby D/Dolby D Plus/TrueHD LastValid
DTS/DTS-ES/DTS-HD LastValid
Other Multlch Source LastValid
Default listening mode for analog and PCM sources.
2
Use 1/$ to select the signal format that you want to
set, and then use "_/_ to select a listening mode.
Only listening modes that can be used with each input
signal format can be selected (_ pages 35 to 39).
The "Last Valid" option means that the listening
mode selected last will be used.
The "Straight Decode" option means that straight
decoding listening mode (Dolby Digital, DTS, etc.) is
selected.
• For the "AM" or "FM" input selector, only "Analog" will
be available.
• For the "NET" or "USB" input selector, only "Digital"
will be available.
mAnalog/PCM/Digital
With this setting, you can specify the listening mode
used when an analog (CD, TV, LD, VHS, MD, turntable,
radio, cassette, cable, satellite, etc.) or PCM digital (CD,
DVD, etc.) audio signal is played.
• For the "EXTRAI" and "EXTRA2" input selectors, only
"PCM" is available.
I
I
I
Mono/Multiplex Source
With this setting, you can specify the listening mode
used when a mono digital audio signal is played (DVD,
etc.).
2ch Source
With this setting, you can specify the listening mode
used when 2-channel (2/0) stereo digital sources, such as
Dolby Digital or DTS, are played.
Dolby D/Dolby D Plus/'rrueHD
With this setting, you can specify the listening mode
used when Dolby Digital or Dolby Digital Plus format
digital audio signals are played (DVD, etc.). Specifies
the default listening mode for Dolby TrueHD sources,
such as Blu-ray or HD DVD (input via HDMI).
Advanced Operations
m DTS/DTS-ES/DTS-H D
With this setting, you can specify the listening mode
used when DTS or DTS-HD High Resolution format
digital audio signals are played (DVD, LD, CD, etc.).
Specifies the default listening mode for DTS-HD Master
Audio sources, such as Blu-ray or HD DVD (input via
HDMI).
mOther Multich Source
Specifies the default listening mode for multichannel
PCM sources from HDMI IN such as DVD-Audio, and
DSD multichannel sources such as Super Audio CD.
En-58
©©

Onkyo HT-R791 Specifications

General

Brand	Onkyo
Model	HT-R791
Category	Receiver
Language	English