Zone 2
In addition to the main listening room, you can also enjoy
playback in another room, or as we call Zone 2. And, you
can select a different source for each room.
There are two ways you can connect Zone speakers:
1. Connect them directly to the AV receiver.
2. Connect them to an additional amplifier.
Connecting the Zone Speakers Directly to
the AV receiver
This setup allows you to select different sources for Main
room and Zone 2. This is called Powered Zone, as the
Zone 2 speakers are powered by the AV receiver.
Main room _v __er
Zone 2 R L
Advanced Operations
Connecting the Zone Speakers to an
Additional Amplifier
This setup allows 7.1-channel playback in your main
listening room and 2-channel stereo playback in Zone 2.
Main room
• With this setup, the volume of Zone 2 is controlled by the AV
receiver.
• When Powered Zone 2 is used, playback ill the main room is
reduced to 5.1 channels.
[ inteR;cte_de;/mP
• The volume of Zone 2 must be set on the Zone 2 amplifier.
En-64 V
©©
To Next Page
Loading...
Need help?
General
