Using an RIHD-
compatible TV, Player,
or Recorder
F41I-IlD, which stands for Remote Interactive over
HDMI, is the name of the system control function found on
Onkyo components. The AV receiver can be used with
CEC (Consumer Electronics Control), which allows
system control over HDMI and is part of the HDMI
standard. CEC provides interoperability between various
components, however, operation with components other
than 1-41l-llD-compatible components cannot be
guaranteed.
The following components are r4Jl-llD-compatible (As
of January 2012).
NTV
• Toshiba TV
• Sharp TV
m Players/Recorders
• Onkyo and Integra I-4ll-tD-compatible players
• Toshiba players and recorders
• Sharp players and recorders (only when used together
with Sharp TV)
* Models other than those mentioned above may have some
interoperability if compatible with CEC, which is part of the
HDM[ Standard, but operation cannot be guaranteed.
• For proper linked operations, do not connect more f"4Jl-ll_-
compatible components than the quantities specified below', to
the HDM[ input terminal.
-Blu-ray Disc/DVD players: up to three.
-Blu-ray Disc/DVD recorders/Digital Video Recorders: up to
three.
-Cable/Satellite Set-top boxes: up to four.
• Do not connect the AV receiver to another AV receiver/AV
amplifier via HDM[.
• Proper linked operations are not guaranteed when more
I-II_-compatible components than the above-mentioned
quantities are connected.
Appendix
N For _JHD-compatible TV
The following linked operations are enabled by connecting
the AV receiver to an r4Jl-llD-compatible TV.
• The AV receiver will enter standby mode when the TV is
set to standby.
• You can set on the menu screen of the TV to either output
the audio from the speakers connected to the AV
receiver, or from the speakers of the TV.
• It is possible to output the audio coming from the tuner or
auxiliary input of your TV to the speakers of the AV
receiver. (A connection such as an optical digital cable or
similar is required in addition to the HDMI cable.)
• Input to the AV receiver can be selected with the remote
controller of the TV.
• Operations such as volume adjustment or similar for the
AV receiver can be performed from the remote controller
of the TV.
m For r4Jl-uD-compatible players/recorders
The following linked operations are enabled by connecting
the AV receiver to an I-4ll-lD-compatible
player/recorder.
• When playback is started on the player/recorder, AV
receiver will switch to the HDMI input of the
player/recorder that is playing back.
• Operation of the player/recorder is possible using the
remote controller supplied with the AV receiver.
* Depending on the model used, not all operations may be
available.
t_ To be continued
En-86 V
©©
To Next Page
Loading...
Need help?
General
