The Home menu provides quick access to frequently used
menus.
1 Press RECEIVER followed by HOME.
The Home menu will be superimposed on the TV
screen.
2 Use </_ or 1/¥ and ENTER to make the desired
selection.
Press HOME to close the menu.
N Network Service
ENTER again switches to that selection. If you want
to play music files on a server, use A/¥/</_ to
select "DLNA" and then press ENTER.
NUSB
With this selection, you can play centents of portable
players (iPod, etc.) and USB storage devices connected
to the AV receiver's USB port (_ pages 24, 25).
Note that this selection will be grayed out for a short
while after the AV receiver is turned on. Please wait
until it becomes operable.
Press ENTER to select a drive or browse the contents
of the media connected, followed by i,/¥ to select the
desired folder or track. Pressing ENTER as a track is
selected will start playback.
N InstaPrevue
With this selection, you can preview audio/video
streams coming from HDMI inputs (HDMI
IN 112131415). Even with multiple components
connected through HDMI, you can easily switch
between inputs as their previews are displayed on a
single screen.
Press ENTER to display the main preview (currently
selected HDMI input) and the additional previews
(other HDMI inputs). Using i,/¥ or <1_ to select a
preview thumbnail and pressing ENTER will switch
the AV receiver to that input source.
Turning On & Basic Operations
• If no video signals are present, the thumbnails will be filled in
black.
• You can specify the number of preview thumbnails as well as
their positioning on screen (3 page 61 ).
• This function cannot be selected when:
- HDMI IN 6/7 is the current HDM[ input source, or
- No signal is present on the current input source.
• Depending on video signals, the picture may not be properly
rendered on the preview' thumbnails of [nstaPrevue.
N Setup
With this selection, you can access the cemmen
settings of the on-screen Setup menu.
Press ENTER to display the Setup menu
(_ page 48).
• You can also access frequently used settings from Quick
Setup (3 page 43).
N Firmware Update
With this selection, you can update the firmware of the
AV receiver. Note that this selection will be grayed out
for a short while alter the AV receiver is turned on.
Please wait until it becomes operable.
Press ENTER to start the procedure (_ page 79).
With this selection, you can use various Internet radio
services or play the contents stored in media connected
to your home network (DLNA) (_ pages 26 to 29).
Note that this selection will be grayed out for a short
while after the AV receiver is turned on. Please wait
until it becomes operable.
Press ENTER to display the network service screen.
If you want to use the Internet radio services, use
A/¥/</_ to select the desired service. Pressing
En-40 V
©©