Playback
m Operating with the remote controller
Turning On & Basic Operations
mOperating on the AV receiver
Inputselector buttons
RECEIVER
A/T
1
2
3
4
Listening mode buttons
Press RECEIVER followed by an INPUT
SELECTOR button.
Start playback on the source component.
See also:
• "Playing an iPod/iPhone via USB" (3 page 24)
• "Playing a USB Device" (3 page 25)
• "Listening to vTuner Internet Radio" (3 page 26)
• "Registering Other Internet Radio" (3 page 27)
• "Playing Music Files on a Server" (3 page 28)
• "Remote Playback" (3 page 29)
• "Listening to AM/FM Radio" (3 page 30)
• "iPod/iPhone Playback via Onkyo Dock"
(3 page 66)
• "Controlling Other Components" (3 page 68)
To adjust the volume, use VOL I/V.
Select a listening mode and enjoy!
See also:
• "Using the Listening Modes" (3 page 35)
1 Use the input selector buttons to select the input
source •
2 Start playback on the source component.
3 To adjust the volume, use the MASTER VOLUME
control.
4 Select a listening mode and enjoy!
N Screen Saver
If there is no video signal on the current input source and
no operation for a specific time (three minutes by
default), a screen saver automatically comes on.
• The time until the screen saver activates itself call be changed
ill the "Screen Saver" setting (3 page 59).
• The screen will return to its previous state if the AV receiver is
operated.
En-22 V
©©