Chapter 6
How to Set the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission.
197
6.7.7 Keys Injection
Note
Use this function to enter the Key Load sub application.
From the System Settings menu, press [8] to
Select the Keys Injection.
Input the Password and press [ENTER]
Press [1] or [2] to enter the function:
[1] for start Key Injection process, proceed to step
#4, then skip to step #7.
[2] for set baud rate, skip to step #5.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
After setup the baud rate then start session to communication.
SYSTEM OPTIONS:
4. Pre-Dial Call
5. Database
6. Pin Pad Settings
7. Keys Injection
KEY INJECT
1. Start
2. Set Baudrate
BaudRate 1200
1. Set to 1200
2. Set to 2400
3. Set to 4800
4. Set to 9600
To Next Page
Loading...
Need help?
General
