Chapter 6
How to Set the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission.
210
6.7.6 Dial Parameters
1. Note
All of the parameters that can be set for phone line communication
are sub-menus under the Dial Parameters menu.
From the Communication Options menu press [6]
for Dial Parameters.
Press [1] to enter the Dial Type menu.
OR
Press [2] for Dialing Prefix.
If in Step 2, [1] Dial Type is selected, the Dial Type
menu will be displayed.
Use the [▲] & [▼] keys to find your selection and
then press [ENTER]. Or Press the number
corresponding with your selection.
If in Step 2, [2] Dialing Prefix is selected, enter the
Dialing Prefix.
Comm. Options
4. Connect Timeout
5. Receive Timeout
6. Dial Parameters
7. Wireless Parameters
Dial Params:
1. Dial Type
2. Dialing Prefix
Dial Type: 1
1. Tone
2. Pulse
_____________________
Dialing Prefix:
To Next Page
Loading...
Need help?
General
