Pioneer PDP-LX6090H User Manual

Setting up08
32
En
Selecting a decoder input terminal
If you have connected a decoder, select a decoder input terminal
(INPUT 1).
1 Press HOME MENU.
2 Select “Setup” (
/ then ENTER).
3 Select “System Setup” (
/ then ENTER).
4 Select “Analogue TV Setup” (
/ then ENTER).
The password entry screen appears. Enter your four-digit password
using buttons 0 to 9. For the password, see Using a password on
page 60.
5 Select “Manual Adjust” ( / then ENTER).
6 Select “Programme Entry” (
/ ).
7 Select a programme number (
/ ).
You can select 1 through 99.
After selecting a channel (using Programme Entry), perform the
following steps:
8 Select “Decoder” ( / ).
9 Select “INPUT 1” (
/ ).
10 Press HOME MENU to exit the menu.
Note
• With “Off” (factory default) selected, you cannot watch any
images from the decoder.
• While watching DTV, no image is output to the decoder.
Labeling TV channels
You can name TV channels that you have set up, using up to eight
characters. This may help you easily identify the channels during
selections.
1 Repeat steps 1 to 4 provided for Selecting a decoder input
terminal
.
2 Select “Label” (
/ then ENTER).
3 Select “Programme Entry” (
/ ).
4 Select a programme number (
/ ).
You can select 1 through 99.
5 Select “Label” ( / then ENTER).
The name entry screen appears.
6 Select the first character ( /// then ENTER).
The cursor moves to the second character.
7 Repeat step 6 to enter up to eight characters.
To correct entered characters, select [] or [] on the screen, and
then press ENTER. The cursor moves to the preceding or
subsequent character.
To delete the current character, select [Delete] on the screen, and
then press ENTER.
To put a space for the current character, select [Space] on the
screen, and then press ENTER.
To toggle between upper case and lower case, select [Caps] on the
screen, and then press ENTER.
8 To complete the name entry, press / or / to select
[OK] on the screen, and then press ENTER.
9 Press HOME MENU to exit the menu.
Note
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as a
VCR or DVD/HDD recorder (DVR).
Programme Entry : 1
Label : 12345678
KIDS
1234567890
ABCDEFGH I J
KLMNOPQRST
UVWXYZ , . : ;
&' ()+-*/_@
OK Cancel
Caps
Space
Delete
Label
PDP-LX609H.book Page 32 Wednesday, August 6, 2008 4:00 PM
Downloaded From TV-Manual.com Manuals

Pioneer PDP-LX6090H Specifications

General

Depth	93 mm
Width	1465 mm
Height	876 mm
Weight	51200 g
Tuner type	Analog & digital
Pixel pitch	- mm
Aspect ratio	-
Product color	Black
Noise reduction	Yes
RMS rated power	36 W
Display diagonal	60 \
Display brightness	- cd/m²
Display technology	Plasma
Number of speakers	2
Teletext standards	Top-text
HDMI ports quantity	3
Supported video modes	1080p
USB 2.0 ports quantity	1
Audio formats supported	AC3, HE-AAC
Number of OSD languages	18
S-Video inputs quantity	0
Video formats supported	MPEG2, MPEG4
Annual energy consumption	- kWh
Analog signal format system	PAL BG, PAL DK, PAL I, SECAM B/G, SECAM D/K, SECAM L
Power consumption (standby)	0.4 W
Power consumption (typical)	524 W
Digital signal format system	DVB-S, DVB-S2, DVB-T
Sound enhancement technology	SRS WOW HD, SRS, FOCUS, TruBass, SRS Definition
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
On Screen Display (OSD) languages	CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, NOR, POR, RUS, SWE, TUR, UKR
Consumer Electronics Control (CEC)	Kuro Link