Using with other equipment12
84
En
Auto Connection
Set Auto Connection to “ON” or “OFF” whether to automatically
connect to the last accessed server. For selection, follow the steps
below.
1 Select “Auto Connection”.
Use or to change the setting.
Selecting “ON” causes the display to access the last server. If the
server is in Standby, WOL (“Wake On LAN”) is activated to turn the
last accessed server “On”.
Selecting “OFF” causes a server list to appear on screen.
“Wake on LAN (WOL)” functions to turn the last accessed server’s
power on if the server is WOL-compliant and is in Standby or sleep
mode, then display the Media Navigator screen. During the WOL is
activated, a dialogue screen appears. If the server is not WOL-
compliant or the WOL function fails, a dialogue appears on the
Server List screen.
To exit Home Media Gallery, press
EXIT
or
HMG
.
Reset to default
To reset options entered within the Home Media Gallery function to
default, follow the steps below.
1 Press
HMG
.
2 Select “HMG Setup”.
Use the arrow buttons to highlight an option then press ENTER.
3 Select “Default Settings”.
4 Select “Yes”.
The setup finishes and the Home Media Gallery screen returns.
To exit Home Media Gallery, press
EXIT
or
HMG
.
Other useful functions
Screen saver
During navigation, the screen saver launches automatically if no
activity is sensed within five minutes. However, when a movie or
slideshow is playing, the panel stops the screen saver from
appearing.
Pressing any button cancels the screen saver.
Dismissing the screen saver does not interfere when connecting a
USB device.
Note
•Pressing p to display the Player status or key guide before
screen saver is activated may cause image retention.
Important
• Do not display the Player status and key guide for an extended
period of time while playing a movie or slideshow to avoid
possible image retention.
Dialogue screen message
Important
• Displaying pictures in the Home Media Gallery for an extended
period may cause an after-image.
No. Message Problem
001 Content cannot be played. (001) No details are available
for the error
100 A communication error
occurred. (100)
No further details are
available for the error
101 No response from server. (101) Timeout period reaches
due to delayed server
response
102 Disconnected from the
network. (102)
Cables are
disconnected
103 Response from server
indicating that it is impossible
to reply. (103)
Invalid response from
the server
300 Content cannot be played. (300) A file that is not
supported is selected
301 This format is not supported.
(301)
A file that is not
supported is selected
500 Failed to authenticate. (500) Failed to obtain DRM
authorization
501 Failed to authenticate. (501) Failed to obtain DRM
authorization
502 Failed to authenticate.
Check for failure of router, hub,
other network devices. (502)
Failed to obtain DRM
authorization
503 Failed to authenticate content.
The copyright notice of this file
might be invalid. (503)
Failed to obtain DRM
authorization
504 Failed to authenticate. (504) Failed to obtain
WMDRM authorization
505 Failed to authenticate.
Check for failure of router, hub,
other network devices. (505)
Failed to obtain
WMDRM authorization
506 Failed to authenticate. The max
count of access devices
depends on server. (506)
Failed to obtain
WMDRM authorization
507 Failed to authenticate. The
licence of this file might be
invalid. Receive the licence
from a server. (507)
Failed to obtain
WMDRM authorization
508 Failed to authenticate. (508) Authorization error
other than above
PDP-LX609H.book Page 84 Wednesday, August 6, 2008 4:00 PM
Downloaded From TV-Manual.com Manuals
To Next Page
Loading...
Need help?
General
