8
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
8.91
9. Remove the IFP bleed screw. Remove the IFP
t
from the reservoir with the IFP tool. Discard the IFP
O-ring and wear band.
IFP Tool:
PN PS-45908
10.Place the shock rod in a vise so that the threaded part
is facing upward.
11. Remove and discard the lock nut. Remove the
rebound valve stack as an assembly.
12.Remove the piston valve / wear band. Discard the
wear band. Note the colors of the piston valve. RED
is the rebound side, and BLUE is the compression
side.
13.Remove the compression valve stack and spring
washer (if applicable).
14.The rebound and compression valve stacks should
be kept in their specified orientations when they are
removed. Inspect the valve shims for damage and
replace as required.
STEERING / SUSPENSIONS
To Next Page
Loading...
Need help?
General
