Polaris RZR PRO XP 2020 User Manual

8
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
8.33
Compression Spring Operation: The torsion retainer
and compression springs
t
act as a return mechanism
to help disengage the coupling of the output hubs and
ring gear by creating an “over-running” condition for the
rollers upon disengagement.
AWD DIAGNOSIS
Symptom: AWD Will Not Engage
1. Check the gearcase coil resistance. To test the coil
resistance, measure between the ground wire
q
(GY) and power wire
w
(BN/WH). Measurement
should be within specification.
Front Gearcase Coil Resistance:
21.44 - 23.70 Ω
2. Turn on ignition and AWD switches and place gear
selector in High or Low. Check for minimum battery
voltage at Gray and Brown/White chassis wires that
power the coil. Should have a minimum of 11 VDC.
3. If electrical tests are within specification, remove
gearcase (see “Front Gearcase Removal” outlined in
this chapter) and inspect components.
FINAL DRIVE

Polaris RZR PRO XP 2020 Specifications

General

Brand	Polaris
Model	RZR PRO XP 2020
Category	Offroad Vehicle
Language	English