Using a Polycom
®
SoundStation
™
IP 7000
Conference Phone
Topics:
• Answer a Call with a Connected SoundStation IP 7000
• Place a Call
• Place a Conference Call
• Control Volume with a Connected SoundStation IP 7000 Conference Phone
• Mute the Microphone
• End a Call
• Display Content with a Connected SoundStation IP 7000
When you connect a SoundStation IP 7000 conference phone to a RealPresence Group Series, you can
use the conference phone to control the system to dial audio or video calls. The conference phone
operates as a microphone and as a speaker in audio-only calls.
For more information, refer to the SoundStation IP 7000 documentation available on Polycom Support.
Answer a Call with a Connected SoundStation IP 7000
Use a connected SoundStation IP 7000 conference phone to answer incoming calls.
Procedure
» Press the Answer soft key on the conference phone.
Place a Call
You can place a call using a SoundStation IP 7000 conference phone connected to a RealPresence
Group Series system.
Procedure
1. Press on the conference phone and press the Video or Phone soft key.
2. On the conference phone keypad, enter one of the following:
• The IP address (for example, 10*11*12*13) of the site you want to call
• The phone number (for example, 19784444321) of the site you want to call
• To enter letters, press the ABC soft key. To enter an asterisk, press the Video button and
then press on the SoundStation IP 7000 keypad two times.
• To enter a dot or @ symbol, press the ABC soft key then multiple times.
You can also place calls using the conference phone's directory or the redial key.
Polycom, Inc. 116
To Next Page
Loading...
Need help?
General
