Resolution Refresh rates (Hz)
800 x 600 56, 60, 72, 75, 85
1024 x 768 60, 70, 75, 85
1280 x 720 50, 60
1280 x 768 60
1280 x 1024 60, 75
1600 x 1200 60
1680 x 1050 60
1920 x 1080 60
1920 x 1200 60
Polycom People+Content IP
The Polycom People+Content IP application enables you to send content from a computer that is not
connected directly to the RealPresence Group Series system or Polycom touch devices.
Keep the following points in mind when using the Polycom People+Content IP application:
▪ Polycom People+Content IP provides video-only content. No audio is shared.
▪ Polycom People+Content IP supports any computer desktop resolution with color set to 16-bit or
higher.
▪ Your computer resolution can be set to anything, but Polycom People+Content IP scales images to
1024x768 or 1280x720.
Note: For a computer connected directly to the RealPresence Group Series system, Polycom
recommends using the Send Computer button or Content button instead of Polycom
People+Content IP.
Download and Install People + Content IP
You need to download and install the People + Content IP application on a computer before you can use
it to show content.
Note: If the room system is paired with a Polycom touch device, you do not need to install the
application onto your computer. After you connect your computer to the touch device over
USB, a version of the People + Content IP application launches automatically.
Procedure
1. On a computer, visit the People + Content IP page.
2. Download the People + Content IP software for Mac or PC.
3. Open the zip file and click on the application installation.
Using a Polycom RealPresence Group Series Remote Control
Polycom, Inc. 23
To Next Page
Loading...
Need help?
General
