View System Health Check Warnings
If any warnings occur during the system health check, you can view them after the system starts.
Procedure
1. Tap to open the Quick Access menu then tap Settings > System Information > Status >
Active Alerts.
2. For more details, select More Information.
Locate the System Serial Number
You can view the system's 14-digit serial number on the local interface of the system.
Procedure
» Tap to open the Quick Access menu, then tap Settings > System Information >
Information > System Detail.
Locate the Software Version
You can view the software version on the local interface.
Procedure
» Tap to open the Quick Access menu then tap Settings > System Information >
Information > System Detail.
Locate Active Alert Messages
You can view the active alert messages on the local interface.
Procedure
» Tap to open the Quick Access menu, then tap Settings > System Information > Status >
Active Alerts for messages generated by your system.
Locate the LAN Status
You can view the LAN status on the local interface.
Procedure
» Tap to open the Quick Access menu, then tap Settings >System Information >Status >
LAN.
View the Status of the EagleEye Director II Camera System
You can view the status of the camera system to help with troubleshooting camera issues.
Procedure
» Navigate to Settings > System Information > Status.
Using the Touch User Interface
Polycom, Inc. 66
To Next Page
Loading...
Need help?
General
