© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 102
Message Please Reset the Treadmill Displayed
Description
On a treadmill, the screen displays the message, Please Reset the Treadmill along with a graphic of the
stop switch.
Possible Causes
1 The Stop Switch lanyard has been pulled and the reset latch has been disengaged. The yellow button
will be raised on the dash.
2 The stop switch reset latch has been engaged, but not fully so.
3 The cable connecting the stop switch to the console is disconnected, loose, or damaged.
4 The stop switch is malfunctioning.
5 The lower board has failed.
Possible Remedies
1 Press down firmly the yellow button on the dash. The tread will reset itself shortly.
2 Pull the lanyard to disengage the reset latch. Press down firmly on the yellow button on the dash to
reset the treadmill.
3 Inspect the connections leading from the stop switch to the console. Ensure that the cables are secure
and undamaged.
4 Replace the lower board.
5 Replace the stop switch assembly.
To Next Page
Loading...
Need help?
General
