© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 92
Poor Quality Video – All Units
Description
Television signal is present, but picture quality is consistently or inconsistently poor across all available
channels.
Possible Causes
1 Loose or damaged coaxial cable at or near head end.
2 Poor television signal from head end.
3 Poor television signal to club.
4 All machines were configured using incorrect region setting.
Possible Remedies
1 Verify condition and connections of video distribution network. Begin as close to head end as possible
and check for visible damage to coaxial cables or connectors. Verify all connections are tight.
2 Check signal quality and strength as close to head end as possible. If poor from the head end have
customer contact their A/V service company to ensure signal from head end is within acceptable
parameters.
3 Troubleshoot as above. Signal provider (e.g. Cable Company, Satellite Company, etc.) will need to
address this issue.
4 Enter the Settings Menu. Select System Settings, then TV Settings. Verify that unit is set for United
States.. See Procedure TV Settings.
To Next Page
Loading...
Need help?
General
