To Next Page

To Previous Page

P80 Cloning Procedure

The following procedure will explain how to save existing P80 console settings onto a USB Flash Drive and

then import the saved settings into another P80 console.

Note: Settings from one P80 console will need to be configured manually and

imported to a flash drive device before cloning and exporting to additional P80

consoles.

1 From the Welcome screen., press the Pause key and continue holding it down while you press in

sequential order an X configuration on the Volume and Channel key pad (

Channel Up, Volume

Down,

 Volume Up, Channel Down). Release the Pause key when done pressing the arrows.

Figure 48: P80 Sign In Access

2 The sign-in screen will be displayed. Type in the technician access code (5,1,7,6,5,7,6,1) and press

enter. The Settings menu will be displayed. See Settings Table.

3 Use the System mode to configure settings in ways that benefit the users and the facility. Changes

made to these settings save to the fitness equipment. To select a Setting touch on an item in the

Settings menu.

4 The Settings screen will be displayed. Select Systems Settings from the Settings menu.

5 From the Systems Settings menu select Manage Settings.

Precor P80 Service Manual

Other manuals for Precor P80