Precor P80 Service Manual

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 20
Initial Configuration Steps
After the P80 is physically installed, it must be configured for the specifics of the facility (TV settings,
network settings, etc.). Below are the steps that need to be performed for the configuration, and in the
order they need to be performed.
Steps to Perform on Each And Every P80
These are settings that are unique to each specific P80, and therefore can’t be cloned (copied) from
console to console.
 Verify that the software is at the current version, and update if necessary per procedure,
Updating Software (see " Section 6 - Updating Software " on page 45).
 Connect the P80 to the facilities network per procedure, Connectivity and Registration
(see " Section 9 - Connectivity and Registration " on page 77).
 Register the P80 with Preva® Business Suite per procedure, Connectivity and
Registration (see " Section 9 - Connectivity and Registration " on page 77).
Steps that can be Cloned (copied)
These are the settings that can be set-up on one P80, and then cloned to all the other P80s at that facility.
 Perform a channel scan, per procedure, Display and Entertainment Settings (see
" Section 7 - Display and Entertainment Settings " on page 55).
 Name all channels, per procedure, Display and Entertainment Settings (see " Section 7 -
Display and Entertainment Settings " on page 55).
 Save configuration and clone to all other P80s per procedure, Cloning Settings (see
" Section 8 - Cloning Settings " on page 69).

Precor P80 Specifications

General

Brand	Precor
Model	P80
Category	Music Mixer
Language	English