To Next Page

To Previous Page

ENFORCER V11 PROGRAMMING GUIDE

Delete devices

Already learnt sirens may be deleted by entering this menu.

Delete all

To delete all wireless bells enter ‘2000’. ‘Please wait’ will be displayed while the system deletes them.

Select bell to delete

This option deletes only a specic wireless bell that is learnt. Any bell that displays ‘learnt’ can be deleted. ‘Please

wait’ will be displayed while the system deletes the wireless bell. Return to this process to delete more devices.

Control Keypad/Speaker?

Wireless Arming Station functions are programmed in the ‘ASSIGN KEYPADS/READERS?’ menu and are mapped

as:

Kpd/Spk #1 : Address [4] Kpd/Spk #2 : Address [5]

Kpd/Spk #3 : Address [6] Kpd/Spk #4 : Address [7]

For the wireless arming station options, please see “Keypad / Speaker Options” on page 23.

Learn devices?

Entering this menu allows the learning of wireless arming stations onto the system.

Select keypad / speaker

Selects the arming station on the system that is to be learnt. ‘Learnt’ will be displayed if an arming station is

already learnt, or ‘Available’ will be displayed if not.

Select keypad / speaker  Learning…

Open the wireless arming station.

Plug the battery connector into the battery terminal.

If a device is not learned, the GREEN and RED LEDs on the device will ash (alternating).

Press and hold the ‘LEARN’ button on the device and all three LEDs will start cycling BLUE, GREEN and RED.

Release the ‘LEARN’ button. If successful, ‘Arming Station Learnt’ will be displayed and a conrmation tone on

the panel will be emitted. If an Arming Station has already been learnt, ‘Arming Station learnt already’ will be

displayed.

Please note: For speaker/sounder unit learning instructions, please refer to the document provided with

the unit.

Delete Devices

Arming Stations and speaker/sounders that have already been learnt, may be deleted by entering this menu.

Delete all

To delete all wireless arming stations enter ‘2000’ (this is the system security code). ‘Please wait’ will be displayed

while the system deletes them.

Select keypad / speaker to delete

This option deletes only a specic wireless arming station or speaker/sounder that is learnt. Any addresses that

display ‘learnt’ can be deleted. ‘Please wait’ will be displayed while the system deletes the device. Return to this

process to delete more devices.

Pyronix ENFORCER V11 Programming Guide

Other manuals for Pyronix ENFORCER V11