EasyManuals Logo
Home>Pyronix>Security System>ENFORCER V11

Pyronix ENFORCER V11 Programming Guide

Pyronix ENFORCER V11
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
42
ENFORCER V11 PROGRAMMING GUIDE
SET UP DOWNLOADING VIA RS232
1. Press b or h to scroll to SET UP DOWNLOADING?. Press .
2. Download By : Use [ or ] to scroll to ‘RS232’. Press .
3. Enter a UDL password (optional). This will need to be referenced in the InSite
software. Press .
4. Enter a Site Name (optional). This will need to be referenced in the InSite
software. Press .
Please note: If a ‘Site Name is set up on the panel, the UDL ‘Site Name must
be exactly the same, otherwise the connection will fail.
CONNECTING TO THE INSITE SOFTWARE:
1. To set up the COM port associated to modem’, open the software, click on Conguration, choose ‘Modem
Conguration and select the RS-232 option
2. Make sure that the serial COM used by the UDL software is set the same as in your PC.
E.g. Control Panel -> Device Manager -> Ports (Typical Windows PC)
3. Make sure that the RS-232 icon (at the bottom of the screen) has turned green
4. Click on ‘Roving Dial customer (or hold Ctrl and press the F10 key).
5. Set the ‘Dial Out Mode eld to RS-232
6. Enter the Engineer code in the Engineer Code eld
7. Enter the ‘Site Name if one has been put in the panel
8. In the ‘Enter Customer In Database As eld, simply give the panel you are connecting to an appropriate
name.
9. Click on ‘Dial and if the connection is successful, the RS-232 icon will become blue
DIAL OUT MENU
DIAL OUT MENU?
Select PC to Dial [-]
Select PC to Dial
This menu is used to select which PC programmed in to the system you would like to dial and connect to.
Operations
Connect to PC
Forces the panel to connect to the InSite software
Test Dial
Dials the InSite, connects and then hangs up.
ARM Service
Send an ARM service report to the InSite software.
Data from PC
Dials the InSite and downloads programming information for that panel.
Data to PC
Dials the InSite and uploads its latest conguration to the customer already created.
Diagnostics
Dials the InSite and sends the diagnostic information such as battery levels.
Commissioning
Dials the InSite, creates a new customer and uploads it’s conguration.

Table of Contents

Other manuals for Pyronix ENFORCER V11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pyronix ENFORCER V11 and is the answer not in the manual?

Pyronix ENFORCER V11 Specifications

General IconGeneral
BrandPyronix
ModelENFORCER V11
CategorySecurity System
LanguageEnglish

Related product manuals