Quantum Superloader 3 User Manual

Chapter 4 SuperLoader Operation
Commands Page
SuperLoader User’s Guide 105
Commands Page 4
You can move tapes, run a system inventory, reset the picker to its home
position, or perform sequential operations from the Commands page.
When you click
Commands, the following page appears:
Figure 76 Commands
Page

Quantum Superloader 3 Specifications

General

Product Type	Tape Autoloader
Number of Tape Drives Installed	1
Number of Cartridge Slots	8
Tape Technology	LTO Ultrium
Data Compression Ratio	2:1
Native Capacity	12 TB
Compressed Capacity	24 TB
Interfaces	SAS
Humidity	20% to 80% non-condensing
Operating Temperature	10°C to 35°C
Supported Media	LTO-5, LTO-4