Quantum Superloader 3 User Manual

Chapter 4 SuperLoader Operation
Configurations Page
SuperLoader User’s Guide 109
System
Operations
Options 4
When you click System Operations, the following page appears.
Figure 78 Systems
Operations Page
SCSI ID 4 You can change the SuperLoader’s and tape drive’s SCSI ID from
On-board Remote Management.

Quantum Superloader 3 Specifications

General

Product Type	Tape Autoloader
Number of Tape Drives Installed	1
Number of Cartridge Slots	8
Tape Technology	LTO Ultrium
Data Compression Ratio	2:1
Native Capacity	12 TB
Compressed Capacity	24 TB
Interfaces	SAS
Humidity	20% to 80% non-condensing
Operating Temperature	10°C to 35°C
Supported Media	LTO-5, LTO-4