Chapter 2 Installation and Configuration
Rack Mounting the SuperLoader
24 SuperLoader User’s Guide
5 With the help of a second installer, insert the SuperLoader into the
rack so that the SuperLoader brackets slide into corresponding
support brackets on the rear rails and the tabs at the front of the
SuperLoader align flush with the clip nuts on the front rails (see
figure 15
).
Figure 15 Sliding
SuperLoader into
Rack
Caution: Do not release the front end of the SuperLoader until
it can be secured to the rack.
Support bracket
SuperLoader bracket
(SuperLoader DLT illustrated)
To Next Page
Loading...
Need help?
General