Chapter 2 Installation and Configuration
Rack Mounting the SuperLoader
18 SuperLoader User’s Guide
Figure 10 Clearance
Requirements for
Rack Mounting
Minimum clearance to load
or unload a magazine from
the system
Minimum clearance to load
a tape via the mailslot
Clearance to door inside a rack
27.0” [686 mm]
6.0” [152 mm]
2.0” [51 mm]
1.0” [25 mm]
3.4” [86 mm]
Minimum side
clearance (both
sides)
FRONT
REAR
Minimum clearance
between the rear of the
SuperLoader and the
inside of the rack (using
standard mounting
brackets adjusted to their
closest setting)
To Next Page
Loading...
Need help?
General