Chapter 5 Troubleshooting
A408: Directory Write
198 SuperLoader User’s Guide
Table 29 Directory
Write Field
Descriptions
Field Description
Called Mode What function was being performed when the event was logged.
1= Read of the Directory when Loading the Tape
2= Write of the Directory while Unloading the tape.
3= Write of Directory from BOT. This is the invalidation of the directory
when loading the media.
Media Format Format/Density the media is written.
4 = DLT 260
8 = DLT600
10 = DLT2000/2000XT
20 = DLT4000
40 = DLT7000
80 = DLT8000
300 = SDLT220
310 = SDLT320
300 = SDLT220
320 = SDLT600
blank media is reported as unknown
Flags: Information DLT drive uses to determine further action if any take in rebuilding this
information and a possible reason why the directory event was logged.
Bit
Description
0 Read on Load Complete
1 Inhibit Directory Write
2LBN 0 Found
To Next Page
Loading...
Need help?
General