Chapter 5 Troubleshooting
A408: Directory Write
200 SuperLoader User’s Guide
Status 2 Status of the Directory located on the media at BOT. Reason for the directory
event if due to the BOT directory. DLT keeps the master copy of the directory
near BOT. Other directory information is maintained in EEPROM and at the
EOT side of the media as back up if the BOT directory is lost.
01h = TK50/70 - No Directory
0Ah = Inconsistent Formats
0Bh = Wrong Format
0Ch = The Reserved fields in the Directory were not equal to 0
0Dh = This is a Partitioned Tape
14h = No Directory Blocks Read
15h = No Directory Blocks read
16h = Not all Directory Blocks were Present
1Eh = Sync Lock Failure Trying to Read the Directory
1Fh = Revision Level Mismatch (revision of directory format and expected
revision)
20h = Verify Failed
21h = Unit on Write-Form BOT
22h = Truncated due to a Tape=Marker EDC
28h = Good Initialized directory read
29h = Good Directory Read (Has Partial EOD)
2Ah = Complete directory
Status 3 Directory Recovery Status (EEPROM directory status used for recovery)
01h = Recovered Directory, but pending validation
0Ah = No LBN 0
0Bh = Media ID of media and EEPROM directory do not match
0Ch = On Tape directory not empty
0Dh = Sync lock Mismatch
14h = Bugcheck during directory update
Field Description
To Next Page
Loading...
Need help?
General