The 5.8 GHz products are suitable for use in, and comply with the Broadband Wireless
Access System (WAS). It is a Class 2 device and uses operating frequencies that are
not harmonized throughout the EU member states. The operator is responsible for
obtaining any national licenses required to operate this product and these must be
obtained before using the product in any particular country.
All RADWIN products that operate in the 5.8 GHz band comply with the requirements
of the harmonized standard ETSI EN 302 502 and the ECC RECOMMENDATION
(06)04
The 3.5 GHz band complies with the standard ETSI EN 302 326‐2 V1.2.2 and draft
standard ETSI EN 302 326‐2 V dft 0.0.2 (20016‐11). The operator is responsible for
obtaining any national licenses required to operate this product and these must be
obtained before using the product in any particular country.
8.7.5 China MII
Operation of the equipment is only allowed under China MII 5.8GHz band regulation
configuration with EIRP limited to 33 dBm (2 Watt).
To Next Page
Loading...
Need help?
General