Rain Bird ESP-SMT User Manual

ESP-SMT Smart Modular Control System
11
Configure Controller
Method 2: Enter Custom Data for Location
Rotate the dial to the CONFIGURE CONTROLLER position...
A
The CONFIGURE CONTROLLER
screen will appear. Press the UP or
DOWN arrow button(s) until Enter
Custom Data for Location begins
to blink; then press the SELECT
button.
B
The LATITUDE & ELEVATION
screen will appear and the value
corresponding to Latitude will be
blinking.
a. Press the - or + button(s) until the
correct value is entered; then press
the NEXT button.
b. The value for Elevation will begin
to blink. Press the - or + button(s)
until the correct value (100 foot
increments) is entered; then press
the NEXT button.
B
B
A
a.
b.
CONFIGURE CONTROLLER
Enter Site Zip Code
- OR -
Enter Custom Data for
Location
SELECT
LATITUDE & ELEVATION
Latitude 35 °N
Elevation 0 ft
NEXTBACK
FINE-TUNE
WATERING
SET DATE
& TIME
AUTO
SPECIAL
FEATURES
SYSTEM
REVIEW
INPUT ZONE
INFORMATION
CONFIGURE
CONTROLLER
MANUAL
WATERING
OFF
RESTORE
SETTINGS

Rain Bird ESP-SMT Specifications

General

Brand	Rain Bird
Model	ESP-SMT
Category	Controller
Language	English