Rain Bird ESP-SMT User Manual

ESP-SMT Smart Modular Control System
32
Input Zone Information
Method 2: Copy Zone to Zone(s)
This method is useful if the conditions for one zone match other zones.
Rotate the dial to INPUT ZONE INFORMATION position...
A
The INPUT ZONE INFORMATION
screen will appear. Press the UP and
DOWN arrow button(s) until Copy
Zone to Zone is blinking; then
press the SELECT button.
B
The Copy From Zone value will
begin to blink;
a. Press the - or + button(s) until the
source Zone number is displayed;
then press the NEXT button.
b. The To Zone value will blink.
Press the - or + button(s) until
the destination Zone number is
displayed; then press the NEXT
button.
c. The next destination zone will begin
to blink. Press the - or + button(s)
until the destination Zone number
is displayed; then press the NEXT
button. Repeat this process to add a
third destination zone if needed.
b.
B
a.
A
B
c.
FINE-TUNE
WATERING
SET DATE
& TIME
AUTO
SPECIAL
FEATURES
SYSTEM
REVIEW
INPUT ZONE
INFORMATION
CONFIGURE
CONTROLLER
MANUAL
WATERING
OFF
RESTORE
SETTINGS
INPUT ZONE INFORMATION
Zone Setup Wizard
Copy Zone to Zone
SELECT
COPY ZONE DATA
Copy From Zone 1
To Zone
And To Zone
And To Zone
2
--
--
NEXTBACK
COPY ZONE DATA
Copy From Zone 2
NEXTBACK
To Zone
And To Zone
And To Zone
3
--
--
COPY ZONE DATA
Copy From Zone 2
NEXTBACK
To Zone
And To Zone
And To Zone
3
6
8

Rain Bird ESP-SMT Specifications

General

Brand	Rain Bird
Model	ESP-SMT
Category	Controller
Language	English