Rain Bird ESP-SMT User Manual

ESP-SMT Smart Modular Control System
49
Manual Watering
This section shows you how to manually water an individual zone, a
combination of individual zones, or all zones.
Rotate the dial to MANUAL WATERING position...
A
The MANUAL WATERING screen
will appear and Water Selected
Zones will be blinking. If you want
to manually water a single zone or
a combination of zones, Press the
SELECT button.
Manually Water Selected Zones
Water a single Zone or any combination
of Zones with a specific manual run time
for each Zone.
B
The MANUAL WATERING MINUTES
PER ZONE will appear and the
value for Zone 1 will begin to blink.
If you want to apply water on zone 1
manually, press the - or + button(s)
to set the desired amount of manual
irrigation for zone 1; then press the
NEXT button.
B
A
MANUAL WATERING
Water Selected Zones
- OR -
Water All Zones
SELECT
MANUALLY WATER
MINUTES PER ZONE
1 12
0
0
0
0
6 0
0
n/a
n/a
10 n/a
n/a
n/a
n/a
2 7 11
3 8 12
4 9 13
5
NEXTBACK
FINE-TUNE
WATERING
SET DATE
& TIME
AUTO
SPECIAL
FEATURES
SYSTEM
REVIEW
INPUT ZONE
INFORMATION
CONFIGURE
CONTROLLER
MANUAL
WATERING
OFF
RESTORE
SETTINGS

Rain Bird ESP-SMT Specifications

General

Brand	Rain Bird
Model	ESP-SMT
Category	Controller
Language	English