-V-
ESP-SMT Smart Modular Control System
Check Box Contents
ESP-SMT System
It is recommended that you familiarize yourself with
the various items below, prior to beginning the
installation process.
Box Contents
A
ESP-SMT Modular Controller (1 of 3 models below)
a. ESP-SMT4 (outdoor controller with key-lock)
b. ESP-SMT4i (indoor controller)
c. ESP-SMT-UPG (upgrade panel for previously installed
ESP-M controller)
B
Controller Mounting Hardware (Four #8 screws)
Other hardware may be required depending on the
mounting surface and materials)
C
Mounting Template (controller models only)
D
ESP-SMT Installation & Operation Guide
E
ESP-SMT Site Prole Chart
F
ESP-SMT Installation & Quick Setup Poster
G
SMT Weather Sensor
H
Weather Sensor Debris Screen
I
Weather Sensor Mounting Bracket
J
Mounting Bracket Hardware (Four Phillips head screws +
nger screw for mounting sensor to mounting bracket)
K
Sensor Wire - 25 feet of 20-2 UV rated wire (not
rated for direct burial)
P/N: 637654-01
To Next Page
Loading...
Need help?
General
