7.1 Evolution autopilot installation
For information on installing and connecting an
Evolution autopilot system, refer to the installation
instructions that accompany the EV-1 and EV-2
units, as appropriate.
7.2 Autopilot commissioning — main
differences between Evolution and
SPX systems
The Evolution system provides a number of features
to improve upon the commissioning process required
by existing SPX and some other autopilot systems.
• Built-in heading and attitude sensor — no
additional uxgate compass required.
• Automatic set-up — the rudder gain, counter
rudder, manual compass calibration and autolearn
settings required for existing SPX systems are no
longer required. This results in a greatly simplied
dockside calibration process for Evolution autopilot
systems.
40
p70 / p70R