SERVICE RAM ADDRESSES 14 June, 2002
5-96
400100(H) – User parameter switch 16 (SWusr_10)
Bits 0 and 1: Leave messages on the POP server after receiving them
Bit 1 0 Setting
0 0 Do not save
0 1 Save all
1 0 Save error only
1 1 Not used
Bit 2: Network delivery scanning using Scan Router V2 Lite
0: Disabled, 1: Enabled
Bit 3: If an error occurs during mail reception, whether to mail a notification to
the sender.
0: Yes
1: No
Bit 4: Whether to receive e-mail automatically when Night Timer is enabled
0: Yes, but only during the day
1: Never
Bit 5: Condition for forwarding received documents to the Scan Router V2
Professional server 0: Forward all documents
1: Only forward documents with Fax delivering IDs
Bit 6 to 7: Not used
400101(H) – User parameter switch 17 (SWusr_11)
Bit 0: SMTP reception 0: Off, 1: On
Bit 1: Route documents received with SMTP 0: Off, 1: On
Bit 2: Respond to request for receipt confirmation 0: Off, 1: On
Bit 3: Not used
Bit 4: Make a request for confirming reception when sending e-mail 0: Off, 1: On
Bit 5: PDF file type selection when scanning
0: Disabled (TIFF-F/JPEG)
1: Enabled (PDF)
Bit 6: Mail reception protocol selection 0: POP, 1: IMAP4
Bit 7: Not used
400102(H) – User parameter switch 18 (SWusr_12)
Bit 0: PC-Fax error report 0: Off, 1: On
Bits 1 to 5: Not used
Bit 6: POP before SMTP (check for received mail before sending mail)
0: Off, 1: On
Bit 7:Print result of sending Reception Notice Request messages
0: Disabled, 1: Enabled
To Next Page
Loading...
Need help?
General
