SYSTEM FEATURES 14 June, 2002
6-62
6.5.5 RECEIVING FROM A FAX INFORMATION SERVICE
This feature allows the user to program a Quick Dial key with codes to receive
selected information offered by a fax information service. The recorded voice
instructions of the fax information service that instruct the operator to press a key to
receive a particular category of information are ignored, and information is received
without further operator intervention.
The fax information service number and other information must be registered under
a Quick Dial key with the appropriate information for contacting the service, then
the operator can receive the information at the touch of one key.
Follow the procedure below to switch this feature on.
1. Press the User Tools key.
2. Select 1 Fax Features > 1 Program/Delete > 01 Prog. Quick Dial.
3. Press a Quick Dial key and enter the required information. For details, refer to
the operating instructions.
4. Select “Others”.
5. Select “3 Fax Info. Service”, press the right arrow key to select “On”, then press
the OK key.
NOTE: When this feature is switched on, the machine cannot detect a busy signal.
This is because the machine dials all the information registered for the
Quick Dial button then shifts immediately to the reception mode.
To Next Page
Loading...
Need help?
General
