5. Press [Encryption Only].
6. Press [OK].
7. Press the [User Tools/Counter] key.
• To use SmartDeviceMonitor for Admin for encrypting the data for specifying settings, you need to
specify the network administrator's [Encryption Password] setting and [Encryption Password] in
[SNMP Authentication
Information] in SmartDeviceMonitor for Admin, in addition to specifying [Permit
SNMPv3 Communication] on the machine. For details about specifying [Encryption Password] in
SmartDeviceMonitor for Admin, see SmartDeviceMonitor for Admin Help.
• If network administrator's [Encryption Password] setting is not specified, the data for transmission may
not be encrypted or sent. For details about specifying the network administrator's [Encryption
Password] setting, see "Registering the Administrator".
• p.33 "Logging in Using Administrator Authentication"
• p.34 "Logging out Using Administrator Authentication"
•
p.30 "Registering the Administrator"
7. Enhanced Network Security
194
To Next Page
Loading...
Need help?
General
