6. Click [Back].
All job logs and device access log records are cleared.
7. Click [Logout].
• On this page, "Delete All Logs" does not appear if either "Collect Job Logs" or "Collect Access Logs"
are not set to [Active].
Downloading logs
Use the following procedure to convert the logs stored in the machine into a CSV file for simultaneous batch
download.
1. Open a Web browser.
2. In the
Web browser's address bar, enter "http://(the machine's IP address or host name)/
" to access the machine.
When entering an IPv4 address, do not begin segments with zeros. For example: if the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine. If you enter it
as "192.168.001.010", you cannot access the machine.
The top page of Web Image Monitor appears.
3. Click [Login].
Log in using an administrator's user name and password.
4. Click [Configuration], and then click [Download Logs].
5. Click [Download].
6. Specify the folder in which you want to save the file.
7. Click [OK].
8. Click [Logout].
• Downloaded logs contain data recorded up till the time you click the [Download] button. Any logs
recorded after
the [Download] button is clicked will not be downloaded. The "Result" field of the log
entry for uncompleted jobs will be blank.
• Download time may vary depending on the number of logs.
• If an error occurs while the CSV file is downloading or being created, the download is canceled and
details of the error are included at the end of the file.
• If a log is downloaded successfully, "Download completed." will appear in the last line of the log file.
• For details about saving CSV log files, see your browser's Help.
• Downloaded log files use UTF-8 character encoding. To view a log file, open it using an application
that supports UTF-8.
6. Managing Access to the Machine
150
To Next Page
Loading...
Need help?
General
