Troubleshooting
108
4
If Connect Copy is Cancelled
Problem Causes Solutions
The machine exits from
Connect Copy.
The main power of the
main machine is off, or the
operation switch has been
pressed.
Turn the main power or operation
switch of the sub-machine on. Then
press [].
The main power of the sub-
main machine is off.
A message is displayed on the main
machine instructing you to check
the sub-machine. Press [Cancel] to
clear Connect Copy. Turn on the
main power of the sub-machine,
press [] and make your set-
tings again.
The Weekly Timer setting
comes into effect on the
main machine.
Turn on the operation switch of the
main machine, and then press
[].
An error message indicates
a breakdown of the main
machine.
The L
LL
L is lit. Copying is not possible. Follow the
instructions displayed.
MartiniC2_EN_Copy-F1_FM.book Page 108 Tuesday, July 27, 2004 1:43 PM
To Next Page
Loading...
Need help?
General
