Printer Features
114
5
Interpreting the configuration page
System Reference
❖
❖❖
❖ Unit Number
Displays the serial number as-
signed to the board by its manufac-
turer.
❖
❖❖
❖ Total Memory
Displays the total amount of mem-
ory (SDRAM) installed on the
printer.
❖
❖❖
❖ Firmware Version
• Printer
Displays the version number of
the printer firmware.
• System
Displays the version number of
the system firmware.
• Engine
Displays the version number of
the printer engine.
• LCDC
Displays the version number of
the panel display.
• NIB
Displays the version number of
the Network interface.
❖
❖❖
❖ Controller Option
This item(s) appears when the con-
troller option(s) is installed.
❖
❖❖
❖ HDD: Font / Macro Download
Displays the capacity of the hard
disk drive.
❖
❖❖
❖ Printer Language
Displays the version number of the
printer driver language.
❖
❖❖
❖ Options
Displays the optional trays in-
stalled.
Paper Input
Displays the settings made under the
Paper Input menu.
System
Displays the settings made under the
System menu.
Reference
p.115 “System”
PCL Menu
Displays the settings you made under
PCL Menu.
Reference
p.120 “PCL Menu”
PS Menu
Displays the settings you made under
PS Menu.
Reference
p.121 “PS Menu”
PDF Menu
Displays the settings you made under
PDF Menu.
Reference
p.122 “PDF Menu”
Host Interface
Displays the settings you made under
the Host Interface menu.
When DHCP is active on the network,
the actual IP address, subnet mask
and gateway address appear in pa-
rentheses on the configuration page.
Reference
p.119 “Host Interface”
Interface Information
Displays the interface information.
MartiniC25-EN-Pref-F_FM_ZF.book Page 114 Tuesday, July 27, 2004 11:51 AM